9595 Track Pan 9' Railroad Spill Containment System, 2 Center and 4 Side Pans

Capture Hazardous Spills From Railroad Tanker Cars

UltraTech 9-feet railroad spill containment system. Ultra-track pans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Ultra-track pans may be used to collect small spills and leaks or to capture and channel off significant spills caused by defective equipment or a major overflow. Prevent costly cleanup and regulatory fines. Modular design center and side pans are 53.5-inches long; containment areas can be easily assembled to any length desired. Sealed system polyethylene gaskets keep spills from falling between the rails and pans. Trucks and other vehicles can drive over track pans with grates in place. Economical, easy to install. Modular track pan design can be customized to meet your specific needs. To drive over track pans, firm footing must be beneath the pans; also must"ramp up" to side pans with asphalt or concrete; unique stormwater feature is designed to eliminate"pooling" of rain that falls on top of the center pan covers; rain is channeled onto the ballast between the tracks, stays out of the pans. Low maintenance - unlike carbon steel track pans, ultra-track pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation lightweight track pans can be easily installed without heavy lifting equipment, i.e. Forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces - pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Long work life - estimated to perform 20-30 years; longer than fiberglass pans. Meets SPCC and EPA stormwater management regulations. Also meets new York state chemical bulk storage regulation section 599.17c secondary containment for transfer stations.